This page explains service and repair costs for air conditioners in Kuala Lumpur. We do aircon servicing, cleaning, repairs and troubleshooting . Use this guide to understand what affects the final quote and what is normally included in each service type.
Pricing: confirm the exact price
Call us or contact us on WhatsApp to confirm the price.
What Affects Aircon Service Cost in Kuala Lumpur
- Service type (servicing, chemical wash, repair, installation, gas work, leak fix)
- Unit type (wall split, cassette, ceiling/ducted)
- HP size (bigger units usually require more time and cleaning area)
- Access (high outdoor unit, tight balcony, ceiling height, difficult piping routes)
- Condition (sludge buildup, mold, blocked drainage, wear of components)
- Electrical stability (power surges can affect PCB and relays)
- Urgency (same-day / after-hours handling)
- Parts needed (only when failure is confirmed by diagnosis)
Typical Service Types & Cost Ranges (KL)
These ranges are for common scenarios in Kuala Lumpur. Final pricing depends on unit type, accessibility and the real cause of the issue. If you prefer, you can skip ranges entirely and request a quote via WhatsApp (checklist below).
1) General Aircon Servicing (Routine Maintenance)
- Typical range: RM 90–160 (per unit)
- Usually includes: indoor filter cleaning, basic coil surface care, drainage check, airflow + cooling test
- Best for: routine upkeep, mild odor, reduced airflow, prevention
2) Chemical Wash (Deep Cleaning)
- Typical range: RM 180–350 (per unit)
- Usually includes: deeper coil/blower cleaning, drain pan sanitising, full drainage flush, odor control checks
- Best for: strong smell, heavy dirt, recurring water leaks caused by sludge
3) Repair (Not Cold / Noisy / Fan / Electrical)
- Typical range: RM 120–280 (diagnosis + minor fix)
- Important: if parts are required, we confirm the failure and quote before replacement
- Best for: not cold, unusual noise, weak airflow, fan not spinning, control issues
4) Gas Work (Pressure Check / Leak Check / Top Up)
- Typical range: RM 150–320 (depends on gas type and amount)
- Important: gas top up only makes sense after checking pressure stability and possible leaks
- Best for: weak cooling with confirmed low-gas symptoms
5) Installation / Reinstallation
- Typical range: RM 350–900 (depends on unit type and piping work)
- Usually includes: mounting, piping alignment, vacuum/pressure checks where applicable, test run
- Best for: new setup, relocation, replacement of old unit
6) Water Leak Fix (Indoor Unit Leaking)
- Typical range: RM 120–280 (most drainage/overflow cases)
- Usually includes: drainage clearing, drain tray cleaning, levelling check, water-flow confirmation
- Best for: dripping indoor unit, wet wall, overflow issues
What a Proper Quote Should Include
- Confirmed cause (not guessing)
- Scope breakdown: what work is done and why
- Unit type + access notes
- Post-service test (cooling, airflow, stability checks)
Red Flags (So You Don’t Overpay)
- “Must top up gas” without pressure/leak checks
- Random add-ons that don’t match your symptom
- No explanation of what’s included
- No testing after the work is done
Fast Quote Checklist (Send on WhatsApp)
- Area in Kuala Lumpur
- Unit type: wall split / cassette
- Main issue: servicing / smell / not cold / leaking water / noise / installation / gas
- Number of units
- Photo/video of the issue (if possible)